Smeltech Carbons is an ISO 9001: 2008 Company and gives utmost importance to quality and therefore follows strict international quality standards in manufacturing good quality Silicon Carbide Crucibles. Right from the stage of procurement of raw materials till the end usage of our product, each activity is given personal attendance and quality standards are strictly followed at every stage and process. We ensure our products to be consistent in quality and performance in every supply to our customers. This has enabled the Company to become the pioneer in special application refractories for the Ductile Iron Casting industry.
Our Silicon Carbide Crucibles are manufactured with utmost modern technology, experienced work force, calibrated mechanical equipments and product testing at each and every stage of production and at our in house testing laboratories and furnaces before supplying to the market.
Our products have the following properties:
| HIGH RESISTENCE TO THERMAL SHOCK |
Crucibles in use are subjected to stress by rapid temperature changes and in extreme conditions cause pre mature failures.
Our careful selection of product ingredients ensures an outstanding resistance to thermal shock by rapid heat transfer.
|
HIGH EROSION RESISTANCE |
Metals when melted are abrasive and cause erosion to the Crucible.
High Silicon Carbide content and a high strength with hardness counter resistance to erosion.
|
HIGH RESISTANCE TO CHEMICAL ATTACK / SLAG RESISTANCE |
Alkaline fluxes for light alloys and oxidation / reducing fluxes used for copper alloys form corrosive slags which corrode the Crucible.
The careful selection of ingredients imparts a quality that counters corrosive attack to the Crucibles in use and gives a longer life.
|
HIGH OXIDATION RESISTANCE AND HIGH CONDUCTIVITY |
Normally exterior glazes are provided to Crucibles but these are not fully protective to the Crucibles in use.
Triple glaze mechanism provided in the body imparts protection throughout the use in every metal and ensures a constant melting speed.
|
LOWER METAL LOSS |
With each melt, metal oxidises proportionally to the time taken per each melt.
Rapid melting looks after the lowering of the metal oxidation
|
| COST EFFECTIVE / HIGH LIFE |
Finally the cost of each melt is of importance.
With a good product management, a rapid melt and a high life, a low cost per melt is achieved.
|
